Snowboard Holder Mount for Snowmobile

Ride fresh powder all day is your sled and snowboard, and never worry about dealing with your board!

The Snowboard Holder Mount Kit can be attached to either side of our Patrol Rack or you can install two of 'em for carrying two snowboards. The snowboard holder is why we started building snowmobile racks - as carrying your snowboard in a backpack is a total pain. The Snowboard Holder Mount Kit simply bolts to the side of our racks.

The mounts are made ​​from rugged plastic so it is extremely tough while soft enough that It won't chew up your board. Quick-release ratchet straps allow for fast and easy "gloves on" loading and unloading while keeping your board secure while riding There is enough flexibility in the length and straps to allow for different board widths to be Easily secured to your snowmobile.

The mounting kit Does not use up any of the interior rack space so you can mount your boards and still have the full carrying capacity of the rack. Being reliable to bring extra gas along on your backcountry adventures means no more wondering or worrying if you have enough gas to get home long after a day of shredding!

The system is a perfect fit for Ski Doo Summit series and Polaris RMK. Put a Patrol Rack and ski or snowboard holders on and you're all set.

All Prices in USD.

What it holds:

• 1 per snowboard Mount Kit
• Racks can hold 1 Mount Kit per side

NOTE: Rack must be separately purchased this, the Snowboard Holder Mount Kit Does not include the snowmobile rack.

Works with:

• Patrol Snowmobile Rack

Specs:

Weight: .6 pounds
Material: UHMW plastic holders, over-sized stainless steel bolts (do not worry it is strong enough!)
Hardware: Snowboard Mount Includes all mounting hardware and bolts required for installation.
Installation: Bolts onto racks via pre-drilled holds - takes about 5 minutes to install (Including a 3 minutes break)

Shipping:

Free shipping with all orders over $ 165 Within Canada and the US (lower 48 States). Worldwide shipping available.

Frequently Asked Questions?

Why use a snowmobile rack?

A snowmobile rack allows you to carry the gear you want to bring with you up the mountain without wearing it physically on your back. A snowmobiler will always want to carry safety critical equipment in a backpack, but for the fun gear for skiing or snowboarding that gets too heavy and reduces the enjoyment of the day via the physical toll and incumbrance of riding.

How do skis or snowboards fit on the rack?

Each rack has pre-drilled holes aligned to fit either our ski holder or snowboard holder, so you can set your rack up for how you like to head downhill. One ski holder or snowboard holder can be fitted to either side, so a total of two carriers can be installed for two sets of skis, two snowboards, or one of each. Each ski or snowboard holder must be purchased separately.

How does the snowboard holder a snowboard?

There are two main elements. There is a covered bolting system to hold the skis up and support them tightly in three directions. A 3/8" stainless bolt fits into the side of the rack and is covered inside, outside, and from the bottom with a durable plastic sheath to protect the snowboard edges. Then there is the strapping system. This holds the snowboard down, so it doesn't bounce out while riding. This uses a combination of webbing, a protective and specialized rubber coating for cut resistance, and a snowboard buckle for tension. This allows for a very tight and secure hold of the snowboard that is easily manageable even with gloved hands, and durable enough to handle the tough environment that is the backcountry.

What makes Port Tack Racks Better than other options?

The main features of the Port Tack Racks system are durability, simplicity, safety, and price. Our racks are molded and welded perfectly to provide tremendous form stability. We have not had a rack fail in almost ten years, and the welding is beautiful. This is not an accident, as the design incorporates a rolled aluminum sheet and pre-rounded fittings for the pipe.  Our welding is done in an aluminum-only weld shop, so there is no carbon contamination.

For safety, you'll notice all rounded corners of considerable radius. This avoids the very real risk of cutting which can occur from many of the CNC rack options available. When the sled rolls on top of the rider, or the rider gets slammed back into the rack from hitting a tree or other object, it is much safer to have the impact spread on a rounded surface than a surface that looks like a knife edge.

Finally, we stripped down the product requirements to the bare minimum, and have included everything needed and nothing extra to provide tremendous value to the community.

How long does shipping take?

We are located in North Vancouver, British Columbia, Canada ship with Canada Post and  US Postal System (USPS) . For most of the main riding locations like BC, Alberta, Washington State, Oregon, California, Utah, Nevada, Montana, and Idaho the racks can be delivered in about 2-3 days. It can take a day or two longer, depending on weekends. For Alaska and back east, add a few days.

Have a question that is not answered?  Is something not clear?  Send us an email at ben@portackracks.com or phone us at 604 340 3749 - we are to help!

Reviews:

"I'm the kind of guy Who does 3-4 months of research before I buy anything. I Looked at all the different racks out there and love the PortTackRacks system. What sold it for me is the strapping system, Where It's so easy to adjust the straps so easy and Without Any tools ... Thanks!
"- Dane, Michigan

"We went to the mountains today with the new rack and LOVED IT!"
- Rob Meyer, AK

"Received today ... very pleased - quality product - Secures gas tank to the tunnel 10 times better than a bungee cord" 
- J & B Liston, NB

"Wow, this rack is just what the guys need! When I ran it everyone HAD Their Own custom stuff strapped together
"- Iron Dog race participant

"A whole season under our belts and the racks look as good now as They Did When new!"
- Phil Ghent